Rear Coilovers for BMW 5 Series E39 1995-2004 Saloon 520i 523i 525i 540i 525tds

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Applications

For BMW 5 E39 1995-2004 RWD Saloon

Model: 520i, 523i, 525i, 528i, 530i, 535i, 540i, 520d, 525d, 530d, 525td, 525tds

Note: Not for Wagon or M5 Models
         Will not fit Self Leveling/Air suspension model
         Front OE top mounts need to be modified , add spacer on shaft

Specifications

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

Damping : fixed damping

Top mounts: OE top mounts required

Spring Rate Rear: 2.5 kg/mm (140 lbs/in)

Rear spring inner diameter: 62-87 mm

Spring length Rear: 355 mm

Spring Preload advised: 7-10 mm

Shock Type: Twin tube

Package included
2x Rear coil-overs
2x C spanners

Dimension
Package size : 73.2*27*20.1 cm
Weight: 12800 g

Feature

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-20 months will keep it smooth and clean, which helps to extend the lifetime.