This solid WRAS aproved brass thermostatic exposed shower mixer - black matte finish dual kit riser pack is a sleek and modern design and a cost effective showering solution.
This thermostatic shower mixer with bar valve allows you to halt or control the flow of your shower whilst the thermostatic control gives complete temperature performance, suitable for any modern bathroom.
8" (200 mm) round slim shower head with an adjustable swivel joint, so it can be tilted to adjust the spray and allow ease of use
Exceptional build quality and finish
Tarnish and corrosion resistant
Child friendly - features a built-in anti-scalding safety device, which makes it ideal for family bathrooms
Durable and solid brass construction
3 mode handset with a black matte plating
Easy clean rubber nozzles on both overhead and handset
Round thermostatic mixing valve of brass construction with built-in diverter and black matte finish.
The height of the riser rail is adjustable (from 790mm - 1170mm) and you can slide the hand held shower head up and down to a suitable height.
UK standard size fitting
Suitable for the following water systems:
Combination boiler systems
Gravity-fed systems (only with a pump)
Pumped hot water systems
Un-vented hot water systems
Standard pressurised hot water cylinder type systems
Finish: Black matte
Shower head: 8" (200mm)
Shower hose: 1.5m Flexible PVC Hose
Shower handset: Black matte Finish
Anti-scalding: Built-in device
Child friendly: Yes
Temperature range: 20-50 degrees C
Mounting Type: Wall Mounted
Minimum pressure: 1 bar
Maximum pressure: 5 bar
1 x Thermostatic valve (WRAS approved)
1 x 3 Mode handset
1 x Solid brass slim shower head
1 x 1.5m Double interlocking hose
1 x Bracket
Complete fitting accessories
Shower section: get inspired by real projects
And here are our product suggestions
Questions & answers
All you need to know about this product from our experts
No questions have been asked (yet). So you can get started as soon as you are ready!
Overall rating out of 5 customer reviews
28 December 2021
Perfect replacement good quality and value for money
3 April 2021
Looks great. Difficult to screw in without scratching it though, even with a cloth or cling film between spanner and nut, but I managed to hide the scratches with a black permanent waterproof marker that I already had. Very pleased. My bathroom looks very stylish. I managed to put it up myself as well, which was tricky because of the plumbing required, but manageable for a novice, after watching tons of YouTube videos re: copper pipes and compression joints. It came with the easy-to-fit brackets for the pipes, but I didn’t use them because the hot water pipe was too short, so I used part of an equal compression joint instead.