Régulateur de charge solaire MPPT 100A 12V 24V 36V 48V Écran LCD Double port USB Efficacité jusqu'à 99,5%

This high-quality MPPT + PWM solar controller is designed to optimize the energy efficiency of your solar system. While not a 100% MPPT, its tracking efficiency is impressive, reaching up to 99.5%. It automatically recognizes 12V, 24V, 36V, and 48V voltages and features dual 5V USB charging ports.

Technical Specifications

• Item Type: Solar Charge Controller

• Material: ABS

• Voltage: Adaptable to 12V, 24V, 36V, 48V

• Rated Current: 100A

• Maximum PV Voltage: 100V

• Maximum Solar Input (Voc): 15-25V (12V battery); 30-50 V (24 V battery); 45-75 V (36 V battery); 60-100 V (48 V battery)

• Maximum photovoltaic input power: 1200 W (12 V battery); 2400 W (24 V battery); 3600 W (36 V battery); 4800 W (48 V battery)

Compatibility and Accessories

Compatible with the following battery charging:

• Sealed

• GEL

• Flooded

• LiFePO4

Installation

Follow the instructions provided to ensure correct and safe installation. Ensure the system is powered off before beginning installation.

Usage

To use the controller, follow these steps:

• Never allow the battery to discharge.

• Light control mode: The controller begins discharging after 10 minutes at night and stops after 10 minutes during the day.

• Light and delay control mode: Discharging begins after a 10-minute delay at dusk and stops according to a countdown timer.

• General control mode: Discharging is maintained continuously.

• Manual control mode: Use the '▼' button to check the discharge status.

• Timer control mode: Regularly turn the discharge on or off.

• Test mode: Similar to the light control modes, but with a shorter delay.

• Low voltage protection The controller discharges if the voltage is too low. Other information: The controller is equipped with a backlit, multi-function LCD screen that displays the clock and provides access to 7 different operating modes.