Relay Switch, 30g/1.1oz YYC-2S Adjustable Timer Relay Automation Control Switch Module with LED Display and Plastic Material, 24 Functions (12V)

Features: 1. Made of high-quality material, durable to use. 2. It has 24 common functions to meet more application requirements. 3. Can control solenoid valves, water pumps, motors, light strips, etc. 4. Low power consumption, superior performance. 5. The product has a wide range of applications and can be used in many fields. Specifications: Features: Made of high-quality material, durable in use. It has 24 common functions to meet more application requirements. Can control solenoid valves, water pumps, motors, light strips, etc. Low power consumption, superior performance. The product has a wide range of applications and can be used in many fields. Specification: Model: YYC-2S Material: Plastic Weight: 30g/1.1oz Voltage: 5V, 12V, 24V (optional) Output Power: One DC or AC load within 5A can be controlled Time Range: 0.01 seconds to 999 minutes can be adjusted at any time Wiring Port Description: 1. DC+: Positive input of DC power supply 2, DC-: Cathode input of DC power supply 3. IN+: Positive input of signal 4, IN-: Negative input of signal 5. NO: The relay normally opens the interface, and the relay is suspended before absorption, and is connected to COM shortly after absorption 6. COM: Relay public interface 7. NC: The relay normally closes the interface and is short-circuited to COM before absorption and suspended after absorption. Key setting instructions: The power-on display "-------" means entering standby mode. State; Press K1 for the first time (it takes more than a second to be effective to avoid a false trigger), and it displays: p-11: K2 adjusts the main mode, K3K4 adjusts the function. Press K1 a second time, the screen will display: a001: k2 and K3 to set A for the first time and K4 to set the decimal point (time unit). Press K1 a third time and the screen will display: b001: k2 and K3 to set B for the second time and K4 to set the decimal point (time unit). Press K1 a fourth time and "--" indicates standby state. Press K4 in standby state to permanently close/open the screen and enter power saving mode. Description of the time unit Decimal point: X,XX decimal point instead of hundreds, timing range: 0.01 second to 9.99 seconds; XX,X decimal point instead of tens, timing range: 0.1 second to 99.9 seconds; XXX has no decimal point, timing range: 1 second to 999 seconds; XXX decimal point instead of units, timing range: 1 minute to 999 minutes. Package list: 1 x timer relay