Remote control compatible with Faac TM1300, TM TM1 TM2 TM3 300 330 MHz

REMOTE CONTROL COMPATIBLE WITH FAAC TM1300, TM2300, TM3300:

This remote control is compatible with the FAAC TM 300 series (as shown in the photo above). The compatible model must have the generic marking TM300, TM300S, TM1 300, TM2 300, or TM3 300, depending on the number of buttons, and the 12 coding dip switches (microswitches) (10 on older models). If the model marking is no longer visible on the back of the remote control, open the container and check the circuit board; it should have silkscreen printing or a label with the code. Dimensions (5.5x3.5x1.3) cm.

FEATURES:

• Self-learning the code directly from the original remote control.
• Made of ABS and aluminum with a refined and modern design.
• It is equipped with a 27A 12V battery already included in the remote control.
• It can memorize up to 4 commands (all at the same frequency).
• Fixed code set at 330 MHz
• li>

PROGRAMMING INSTRUCTIONS:

1. Simultaneously press and hold the "Open" and "Close" buttons; the LED will flash 3 times, then simply release the "Close" button. and press it quickly 3 times. The LED indicator will start flashing, then also release the "Open" button.
2. Place the two remotes back to back.
3. Press and hold the button on the remote you want to copy, then press and hold a button on the universal remote you want to program, and hold both buttons until the LED indicator flashes continuously.
4. < /ol> <p>Note: A button or body color on your remote that differs from the one in the photo will compromise compatibility.
   <p>Note: To receive an invoice, you must send a message directly to the seller with all billing information, including the PEC or Recipient Code.