Remote control for garage doors/gate control – Compatible with LiftMaster 4330E, 4332E, 4333E, 4335E – Frequency: 433.92 MHz – Pack of 2

COMPATIBILITY - Compatible with a frequency of 433.92 MHz, it works perfectly with models such as 4330E (4330EML, G4330E, G4330), 4332E (4332EML, G4332E, G4332), 4333E (4333EML, G4333E, G4333) and 4335E (4335EML, HE4331, G4335E, G4335), 1A5477-1, 1A5477-3, 1A5097, 1A5080, HE4331
1 CHANNEL - With a single channel, you can open gates and garage doors quickly and easily. Efficient.
USER MANUAL – Programming and troubleshooting are quick and easy thanks to the included user manual.
BATTERIES INCLUDED – Ready to use immediately thanks to the included lithium batteries.
REMOTE CONTROL – 2-year warranty and fast, 24/7 customer support. Please contact us with any questions. COMPATIBILITY – Compatible with a frequency of 433.92 MHz, it works perfectly with models such as 4330E (4330EML, G4330E, G4330), 4332E (4332EML, G4332E, G4332), 4333E (4333EML, G4333E, G4333), and 4335E (4335EML, HE4331, G4335E, G4335), 1A5477-1, 1A5477-3, 1A5097, 1A5080, and HE43311. CHANNEL – A single channel allows you to open gates and garage doors quickly and efficiently. INSTRUCTIONS – Programming and troubleshooting are quick and easy thanks to the included user manual. BATTERIES INCLUDED – Thanks to the included lithium batteries, the device complies with all regulations. REMOTE CONTROL – 2-year warranty and fast, 24/7 customer service. Please contact us if you have any questions. Description: 1. Programming method: Programming via the receiver 2. Button: 1 button 3. Frequency: 433.92 MHz 4. Battery: Built-in battery 5. Range: 10 m–50 m (outdoors)

Compatible models:

4330E(4330EML,G4330E,G4330)4332E(4332EML,G4332E,G4332)4333E(4333EML,G4333E,G4333)4335E(4335EML,HE4331,G4335E,G4335)

Access to the receiver is required. Make sure you have access to the receiver/door opener before purchasing. Programming: Deleting a Code: To delete a code, press and hold the learn or code button on the receiver until the first light flashes slowly and then stays on until another light illuminates. This indicates that the code has been deleted. 1. Press the programming button on the motor. The LED will light up. 2. Press the desired button on the new remote control. 3. The light on the door opener will flash, confirming successful programming. The door opener will now work when you press the button on the remote control.