1/3
Remote control for shutter, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
General description This remote control is compatible with various Somfy RTS products, allowing you to operate your shutters seamlessly. Please note that this is a compatible remote control, not an original product. Technical specifications Frequency: 433 MHz Channels: 4 Battery: 12 V / 27 A alkaline Compatibility and accessories Compatible with RTS models: Keytis NS 2 RTS Keytis NS 4 RTS Keytis 2 RTS Keytis 4 RTS Keygo 4 RTS Telis 1 RTS Telis 4 RTS Telis Soliris 1 RTS Telis 4 Soliris RTS Telis 1 Modulis RTS Telis 4 Modulis RTS Compatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS Contents: 1 remote control Installation Open the receiver box located near your motor. On the receiver board, press the Prog 1 programming button until the LED L1 lights up on the receiver. Press a button on your new remote control, then release it. The LED light on the receiver will flash and then turn off. Wait 10 seconds for your new remote control to be programmed. For white Telis programming with a hidden button: Press the hidden button for 2-3 seconds on the original remote control, then press buttons 1 and 2 on the new remote control for about 1-2 seconds at the same time, followed by pressing button 4 for 1-2 seconds. Your remote control is now ready to work.
Features
- BrandOTHERS
- Length15 cm
- Width15 cm
- Height35 cm
- Weight2000 g
You are here:



















