Rosvola Water Level Controller, Adjustable Stainless Steel Float Sensor, for Heating, Coffee Machine AC 0-220V.

Features:

1. Wide Application: The water level controller is widely used in anti-dry water level sensors for water heating equipment such as water dispensers, water heaters, solar power systems, humidifiers, coffee makers, small refrigerators, etc., and is also widely used in automobiles, industrial equipment, agricultural equipment, and household appliances.

2. Normally Closed and Normally Open: Our liquid level controller can be adjusted manually. Use pliers to remove the circlip under the float switch and adjust the float's direction. 3. Stainless Steel Material: Made of 304 stainless steel, resistant to acids and alkalis, high temperatures, and corrosion, ensuring a good material and long service life. 4. Easy to Install: With its small size and light weight, this controller can be easily installed for precise and efficient operation! 5. IDEAL REPLACEMENT: A wonderful replacement for old and damaged parts, fine workmanship, attention to detail, helps you improve work efficiency!

Specifications:

Item Type: Water Level Controller Material: 304 Stainless Steel Basic Parameters: Stroke: approx. 10 mm / 0.39 inch Measuring medium: water, oil with a density greater than 0.8 Operating voltage: 0-220 (V) Operating current: 0.5 A-1 (A) Medium temperature: -20 ℃ to 120 ℃ Operating temperature: 0 ℃ to 120 ℃ Maximum temperature resistance: 120 (℃) Operating pressure: 1 (Mpa) Maximum withstand voltage: 5 (Mpa) Maximum power: Low voltage: 10 W High voltage: 50 W Maximum switching current: Low voltage: 0.5 A High voltage: 1.5 A

How to use:

Install and use!

Package list:

1 x controller

Note:

1. The floating ball is made entirely of 304 stainless steel, and the clamping spring is made of 316L stainless steel. The low voltage version refers to the float switch, which can be used in DC circuits from 0 to 110V. The high voltage version refers to the float switch, which can be used for AC lines from 0-220V and DC lines from 0-200V. The high temperature resistance refers to the float switch's ability to withstand a prolonged temperature of 120 degrees Celsius. High temperature and high pressure versions use high-temperature white silicone wires, while low pressure versions use standard black wires. Float switches cannot directly control solenoid valves, high-power relays, AC contactors, etc. A small relay is required for conversion. The float stroke is 10mm, meaning the control range is 10mm. If the control range is wide, two combinations can be used for installation: a long one and a short one.