Rosvola Water Level Sensor Switch, 304 Stainless Steel Liquid Float Ball Controller AC 0 to 220V.

Features: 1. Wide Application: This float level controller can be widely used in water dispensers, hot water dispensers, solar power systems, air conditioners, humidifiers, coffee machines, small refrigerators, and other water heating equipment to prevent water level sensors from burning out, etc., in cars, industrial equipment, agricultural equipment, and household appliances in a wide range of applications. 2. Manually Adjustable: This float level controller is manually adjustable by using a vise to remove the circlip under the float switch, then adjusting the float's direction. 3. 304 Stainless Steel: This float level controller is made of excellent 304 stainless steel, resistant to acids and alkalis, high temperatures, and erosion, with good material and a long service life. 4. Two high-temperature resistant wires: This float level controller features two high-temperature resistant wires that offer good resistance to acids, alkalis, and fungi, as well as resistance to many types of grease, ensuring a long service life. 5. Easy to install: This float level controller is very easy to install; simply screw the threaded port of the controller into the desired location. Specifications: Item Type: Float Level Controller Material: 304 Stainless Steel Basic Parameters: Stroke: Approx. 10 mm/0.39 inch Measuring medium: water, oil alcohol density greater than 0.8 Operating voltage: 0-220 V Operating current: 0.5 A-1 A Average temperature: -20 ℃-120 ℃ Operating temperature: 0 ℃-120 ℃ Maximum temperature resistance: 120 ℃ Operating pressure: 1 Mpa Maximum pressure resistance: 5 Mpa Maximum power: Low pressure: 10 W High pressure: 50 W Maximum switching current: Low voltage: 0.5 A, High pressure: 1.5 A How to use: Simply install in the appropriate equipment. Package list: 1 x Water level sensor switch Note: 1. The float is made entirely of 304 stainless steel, and the clip spring is made of 316L stainless steel. 2. Low voltage means the float switch can be used for DC circuits from 0 to 110V. 3. High voltage means the float switch can be used for AC circuits from 0-220V and DC circuits from 0-200V. 4. High temperature means the float switch can withstand temperatures up to 120 degrees Celsius for extended periods. 5. The white silicone high-temperature wire is for high temperatures and high voltages; the standard black wire is for low voltages. 6. Float switches cannot directly control solenoid valves, high-power relays, AC contactors, etc. A small relay is required for conversion. 7. The float ball travel is 10mm, meaning the control range is 10mm. If the control range is large, you can have 2 combinations: 1 long installation and 1 short installation.