RV Pre-pressurized Water Tank Accumulator Maximum 125psi 0.75L with 2 Clamps 1 PTFE Tape Mini Pressure Tank for RV Boat Food Beverage.

1. UNIVERSAL PRE-PRESSURIZED ACCUMULATOR TANK FOR RVS: Pressure range 10 psi-125 psi, suitable for most pumps on the market, constant pressure, reduces pump circulation and solves the problem of pulsation in the RV or onboard water system. 2. EXTEND PUMP LIFE: Stores water pressure from the water line during peak periods, cushions damage caused by high water pressure to the pump, reduces noise, reduces frequent pump starts and provides more stable operation. Water supply 3. WIDE RANGE OF APPLICATIONS: Pre-charged accumulator pressure tank to 10 psi (0.7 bar) in the tank before leaving the factory, compatible with motorhomes, caravans, boat pressurized water systems, food and beverage filling and liquid distribution and any other pressurized system to help you. 4. EASY TO INSTALL: Please read the user manual carefully before use. Adjust the pressure in the water tank to be less than the pump switch pressure of 3psi (0.2 bar). The connection ports are threaded joint nozzles. Connect the wing nut fittings to the energy storage end of the accumulator tank. The hose is secured with the clamp, and the hose connects the accumulator tank and the pump. 5. APPLICABLE SCENARIO: Energy storage tanks are suitable for motorhomes, boats, caravans, campervans, and yachts, providing great convenience for your outdoor travels. Specifications: Item Type: Mini Pressure Tank Size: Approx. 20 x 12.7 x 11.4 cm / 7.9 x 5 x 4.5 inches Volume: 0.75L (25.3 fl. oz) Charging Pressure: 10 psi 0.7 bar Maximum Operating Pressure: 125 PSI 8.6 bar Filling Valve: Standard car tire valve Inlet/Outlet Diameter: 1/2 inch MNPT Features: Acts as a constant pressure regulator to prevent system pressure from rising and falling, resulting in a smoother water flow. Function: 1. For RV use: Effectively absorbs excess heat entering the water system piping from the radiator; no popping sound when the tap is turned on. 2. For RV water leaks: After long-term RV use, hose connections can loosen, leading to dripping water and frequent pump starts. The pressure tank can effectively reduce the frequency of water pump starts. 3. During showering: The pressure tank can effectively improve the frequent start-stopping of the water pump caused by uneven pipes and nozzles. Working principle: 1. The pressure tank is pre-pressurized before leaving the factory. 2. When the water pump is turned on, water enters the pressure tank. When the pressure tank is full, the water pump stops working. 3. When water is needed, the water in the pressure tank first enters the pipeline due to the pressure. The water pump remains closed until the pressure in the pressure tank is lower than the water pump's starting pressure, at which point the water pump begins this cycle. Instructions for use: Direct installation. Package list: 1 x Pump body, 2 x Wing nut fittings, 2 x Hose clamps, 1 x PTFE tape, 1 x User manual