Salamander CT60B 1.8 Bar Twin Impeller Positive Head Pump

Positive head are for gravity-fed systems only. As a rule, if your cold-water tank is above the shower (maybe you have a shower in a converted room downstairs) and you have a flow rate as little as 0.5 bar, then you will need a positive head shower pump.

Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave.

It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further.

Solid State Switching is the activation system used within . Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life.

Salamander are champions when it comes to producing small yet powerful . This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations.

This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water.

Silent Showering

Quiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users!

Continuously Rated Motor

Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.

When it comes to you want something that’s going to last, especially if you’re fitting it underneath a bath or at the back of an airing cupboard. That’s why the components need to be reliable, and you don’t get much more reliable in the bathroom than brass. These feature heavy duty brass ends designed to give you year after year of total reliability.

3-Year Guarantee

When buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard.

This shower pump comes complete with 4 x 15mm to 22mm Straight Pushfit Couplers (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself.

If you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

The best kind of shower pump is the type that no one knows is there. The CT60B is exactly that. Compact enough to be stored in an attic or an airing cupboard. 

Do you need a pump?

Do you have a lower flow on your hot supply compared with your cold supply? Then depending on your shower you should be able to fit a shower pump to boost up your pressure.

The CT60B from Salamander is a regenerative type pump, this means they have a specially designed impeller to assist in the removal of air from the water system. The ideal pump to use when you have a lot of complicated pipework with multiple bends and elbows.

As with all twin impeller pumps it’s designed for connection onto both the hot and cold stored water supplies. The benefit of this type of installation is that both water supplies are boosted to the same level of pressure giving you a better level of control when using the shower.As a final seal of quality, Salamander cover the product with a fantastic 3 year guarantee!

Features and Benefits:

• 1.8 Bar
• Positive head
• Twin ended
• Regenerative type
• 3 Year manufacturers guarantee

 Technical Specifications:

• Closed head pressure: (1.8 bar)
• Max amps/watts: 2.10A
• Rating: Continuous
• Suitable for positive head installations only

Additional information:

The Salamander Accuboost 450L Pumped Accumulator Tank boosts the hot and cold water pressure to the outlets within a bathroom, including , baths, basins and toilets, CT60B has been specifically designed to meet the demand for water within bathrooms, ensuites and utility rooms.

The CT60B is only suitable for a positive head, gravity fed system. Installing a in a negative head system will mean the pump may not work.

The Salamander Accuboost 450L Pumped Accumulator Tank is compatible with the following:

• Shower
• Individual outlet
• Bathroom
• Pump type
• Positive head
• Twin hot & cold

The CT Bathroom twin ended, positive pumps will boost the water pressure to outlets throughout the bathroom including:

• Toilet
• Wash basin
• Thermostatic