Self-adhesive mirror window film, thermal insulation, stained glass, silver, 90 x 100 cm

• Daytime Privacy Protection - This reflective window film provides excellent daytime privacy because the exterior glass creates a mirrored effect when the exterior light is brighter than the interior light. Note: At night, the mirrored effect is reversed and the interior is visible from the outside, so consider drawing the curtains.
• Easy to Easy to install - This self-adhesive window film with thin adhesive is very easy to install and remove. Just use plenty of water on the glass surfaces to stick it. It can be easily removed by peeling the film from a corner and spraying it thoroughly with water. It leaves no residue and does not damage the glass.
• UV Blocking - Blocks 95% of harmful ultraviolet rays and reduces the sun's rays. Protects your skin and allows you to enjoy the sun with peace of mind. Also prevents furniture from fading.
• Thermal Insulation - This temperature regulating window film keeps you warm in winter and blocks heat in summer.
• Wide Applications - Suitable for offices, gyms, homes, shopping malls, rental apartments, etc.

Features:

The solar window film is a real asset: it preserves your privacy, protects from heat in summer and cold in winter, reduces the glare of the sun, regulates heat and reduces temperature, and allows you to reduce your electricity bills.

Even with a large bay window, our mirror window film will offer you a warm atmosphere. As soon as the sun enters, you will feel the cruelty of UV rays. It is therefore important to prepare for shade.

Installation Tips:

Step 1. Keep the window or glass clean.
Step 2. Spray water on the window or glass.
Step 3. Remove the static film from the protective sheet (make sure you have removed it before applying the film to the glass).
Step 4. After installation, apply the film to the wet glass and smooth it down. by hand.
Step 5. Remove air bubbles and excess water with a squeegee.
Step 6. To remove, simply peel the film from any corner. Peels off cleanly and without leaving any residue.

Helpful Tips:

Before gluing, remember to remove the protective film and spray thoroughly with water.
Use a watering can to spray more water on the glass and film surface (the more water, the better). Scrape out any air bubbles with a squeegee.
Cut the film 2mm away from the window frame, take a corner, spray again, stick, and scrape out any bubbles.

Contents:

A roll of window film
1 user manual