Self-priming water pump DC 12V 60W – Flow rate 5L/min – Pressure 116Psi – Suction height 1.5m – For cleaning and solar systems

General description

This high quality DC micro diaphragm pump has a pressure switch which allows automatic operation. It shuts off when the water outlet pressure reaches a sufficient level and restarts when the pressure decreases. It is recommended not to run the pump dry for a long time. This model is ideal for applications requiring energy saving and frequent switching, such as machine washing, water supply to solar systems, and automatic water control.

Technical specifications

• Volt: DC12V
• Power: 60W
• Flow rate: 5L/min
• Maximum working pressure: 116psi (0.8MPA)
• Suction height: 1.5 meters
• Pump lift: 50 meters
• Size: approx. 9.9 x 16.7 cm
• Line length: approx. 29 cm
• Interface outer diameter: approx.10.8mm
• Interface inner diameter: approx. 6 mm
• Package weight: 688 g
• Application: used in industry, agriculture, vehicle modification, cleaning and water treatment.

Compatibility and accessories

The water inlet and outlet interface easily connects with PE or PU silicone hoses.Package included: 1 x self-priming pump.

Installation

• The direction with a small arrow on the pump indicates the water outlet.
• The wires are not divided into positive and negative poles.
• The pump can be placed in any direction.

Usage

• Do not operate the pump at dry.
• The cut-off pressure is factory set and should not be adjusted without caution.
• Avoid pumping impurities to prevent blockage.
• Use a short inlet hose, not longer than 1.5 meters.
• Do not pump strong acidic or alkaline liquids.

Other information

• If not used for a long time, add a few drops of water into the pump port to restore suction.
• Check wire connections if pump is not working.

-Contact our customer service in case you need further assistance