Semi-automatic DC bilge pump small submersible pump 110012v

Features: You have purchased one of the best quality bilge pumps available in the industry. It was developed after years of experience, research and testing by our research staff and thousands of users. It is built to give years of reliable trouble-free performance. Quiet, vibration-free operation. Small size, large effective, high capacity, low current and low noise. Shock resistant ABS housing, stainless steel shafts, rustproof and corrosion resistant. Easy to clean pressure lock strainers. Long life motors, capable of running dry for short periods. All wire ends and terminals with heavy duty marine sealant and located above the highest possible water level by securing with insulated staples or plastic straps. Ideal for fishing boats, cruise ships, yachts, etc. Features: Material: Engineering Plastics Packaging: Carton Type: Non-automatic Drive mode: electrodynamic Pump shaft position: horizontal Impeller Structure: Attached Suction impeller: single suction Pump lift: 3-5m/118~197in Suction diameter: 19mm (3/4") Cable Length: 1m/39in Voltage: 12V, 24V (optional) Flow: 350GPH, 500GPH, 750GPH, 1100GPH (optional) Model1-8 (optional): (1) 12V 350GHP: Current = 1.8A, Pump Lift = 3m/117in, Suction/Discharge Diameter = 19mm (3/4") (2) 12V 500GPH: Current = 2.2A, Pump Lift = 3m/117in, Suction/Discharge Diameter = 19mm (3/4") (3) 12V 750GPH: Current = 2.5A, Pump Lift = 4m/156in, Suction/Discharge Diameter = 19mm (3/4") (4) 12V 1100GPH: Current = 3.0A, Pump Lift = 4m/156in, Suction/Discharge Diameter = 29mm (1/8") (5) 24V 350GPH: Current = 1.8A, Pump Lift = 3m/117in, Suction/Discharge Diameter = 19mm (3/4") (6) 24V 500GPH: Current = 1.2A, Pump Lift = 3m/117in, Suction/Discharge Diameter = 19mm (3/4") (7) 24V 750GPH: Current = 1.5A, Pump Lift = 4m/156in, Suction/Discharge Diameter = 19mm (3/4") (8) 24V 1100GPH: Current = 1.5A, Pump Lift = 4m/156in, Suction/Discharge Diameter = 29mm (1/8") Product size: 11*5.7*5.7cm/4.3*2.2*2.2in Product weight: 338g / 11.92oz Package size: 11.5*10*9cm/4.3*3.9*3.5in Package Weight: 381g / 13.44oz Tips: 1. Automatic bilge pump cannot be used to pump water. It cannot be used for other liquids. 2. When installing, connect to the pump black wire negative (-) terminal and white wire or brown to the positive (+) pole. 3.Use the appropriate fuse. 4. Wire connections must be sealed with sealant. 5.All wires and connections must be above bilge water level. Uniteds necessary, please do not arbitrarily remove the insulation. Marine sealant oxidizer should be used for all threads. 6.Do not run dry. Package list: 1 * Pump 1 * English user manual