1/5
Set of 2 433.92MHz Gate Remote Controls Compatible with DEA GTI2/4, GT2/4, Mio TR2/4, Mio TR2N/4N Garage Door Remote Control
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by AINSCO
You may also like
Compare with similar items
Product information
Description
How to program it? When a button is pressed, the remote sends the radio signal and illuminates the LED which indicates, in addition to the type of code used, the rolling code: HCS - red LED (factory setting); DIP SWITCH HT12 - green LED; DARTDEA Advanced Rolling Transmission - alternating red and green LEDs. To change the transmission code, press and hold buttons T1 and T2. When the remote's LEDs light up (10 seconds), wait for them to flash to indicate the set code type: 1 flash per second = HCS rolling code; 2 flashes per second = DIP-SCHALTER HT12; 3 flashes per second = DART. Press and hold T1 and use T2 to change the flash pattern. Once the new code is selected, press and hold button T2 until the LEDs turn off (5 seconds). Programming with the receiver (Information on the programming procedure can be found in the receiver's instruction manual. For more information on the programming procedure, see [link to manual]). 1. Open the door opener and briefly locate the programming button; an LED will light up on the receiver's circuit board.
Features
- BrandSANS MARQUE
- ColourWhite
- Motorization compatibilityYes
- MaterialPlastic
- Wireless communication protocolRF 433/868 MHz
- Motorisation accessory typeRemote-control
- Motorization useFor gate
- ManoMano ReferenceME228930964
- MMID119983138260
- Product codeTEA-00543
You are here:
'/%3E%3C/svg%3E){kind=small}