Set of 2 float switches for water level sensors – Cable length 40 cm – Thread 10 mm – For pump tanks

General Description The float switch is an essential device for water level control in various systems. It uses a magnet to detect the liquid position, based on a magnetic spring switch and a float. The latter contains magnetic materials that react to variations in water level.Technical specifications Total length: 67 mm / 2.6 inches Floating ball size: 24 x 23 mm / 0.94 x 0.91 inches (L x D) Thread diameter: 10 mm / 0.39 inches Cable length: 40 cm / 15.7 inches Maximum switching voltage: 110 V DC / 0.5 A Maximum power: 10 W (low pressure), 50 W (high pressure)Temperature range: -20°C to +60°C (low pressure), -50°C to +90°C (high pressure)End switch voltage: 110 VDC (low pressure), 220 VDC (high pressure)Maximum charging current: 0.5 A (low pressure), 1 A (high pressure)Compatibility and accessories This device is compatible with various water heating equipment such as: Water dispensers Water heaters Humidifiers Water towers Drainage pools Water tanks Crop ponds Installation Installation of the float switch requires placing it in the desired tank or water system, ensuring that the float can move freely with the water level.Be sure to follow the electrical specifications when connecting. Usage The float switch is used to detect water level and turn devices on or off based on liquid position. It is recommended to use a relay or contactor for higher loads, as the switch can only carry a very low current (0.5A). Other information Please note that the relay or contactor is not included with the switch.