Set of 2 PP float switches with cable, designed for use as level switches in pump tanks.

General description The float switch is an essential device for controlling the water level in various systems. It uses a magnet to detect the position of the liquid, based on a magnetic spring switch and a float. The float contains magnetic materials that respond to changes in water level. Technical specifications Total Length: 67 mm / 2.6 inches Float Ball Size: 24 x 23 mm / 0.94 x 0.91 inches (L x D) Thread Diameter: 10 mm / 0.39 inches Cable Length: 40 cm / 15.7 inches Maximum Switching Voltage: 110 V DC / 0.5 A Maximum Power: 10 W (low pressure), 50 W (high pressure) Temperature range: -20°C to +60°C (low pressure), -50°C to +90°C (high pressure) End-of-stroke voltage: 110 VDC (low pressure), 220 VDC (high pressure) Maximum load current: 0.5 A (low pressure), 1 A (high pressure) Compatibility and accessories This device is compatible with various water heating equipment such as: Water dispensers Water heaters Humidifiers Water towers Drainage pools Tanks water Culture ponds Installation Installing the float switch requires placing it in the desired tank or water system, ensuring that the float can move freely with the water level. Be sure to follow the electrical specifications when connecting. Usage The float switch is used to detect the water level and activate or deactivate devices depending on the position of the liquid. It is recommended to use a relay or contactor for higher loads, as the switch can only carry a very low current (0.5A). Other information Please note that the relay or contactor is not included with the switch.