Set of 3 868MHz Gate Remote Control, Garage Door Remote Control Compatible with Remote Control 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, Garage Door Gate Remote, 4 Channels

Garage door opener remote control for 4020 TX03-868-4 Remote control for remote garage doors Modern and compact stainless steel design Stainless steel insert housing to prevent unintentional actuation Practical fixing clip on the back for optional mounting on a key ring Rolling code against reading and listening to radio signals Range: approx. 50 m (depending on the environment) Sliding cover to prevent handling errors Battery: 3V, CR2 (integrated) Dimensions: 87 x 24 x 16 mm (closed) Compatible devices Garage doors High frequency connector High frequency connector Secure radio encryption thanks to the Rollingcode-Technologie radio system. The frequency modulation process used is less sensitive to interference and increases transmission security. Thanks to the good selectivity, the radio signal from its own transmitter can be well distinguished from other radio signals by the receiver and received safely. STEP 1: Radio receiver on the circuit board (red button, or written next to it in English: CODE or RADIO). STEP 2: Press the learning key (A) on the radio receiver. STEP 3: Press the desired key on the hand-held transmitter (B). The hand-held transmitter transmits the radio code to the receiver. The corresponding indicator light goes out depending on the radio code transmitted to the receiver. The corresponding indicator light goes out depending on the selected channel. STEP 4: Repeat the procedure above to program other transmitters. Replacement garage door opener, this is not an original garage door opener. Garage door remote control frequency 868 MHz 4 channels The garage remote control has been specially designed for use with the 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035V002. Note: not compatible with 433MHz. Encoding Method: Rolling code, encoding by the door motor, activated by pressing the code button on the door motor.