Set of 4 universal remote controls for electric garage door 433 MHz

How to program:

1. Press the top two buttons (A and B) simultaneously for about 3 seconds until the LED flashes quickly (Please complete this step before moving on to the next one).

2. Place the replacement remote key and the original one as close as possible.

With this replacement remote key, you can clone all 433.92MHz fixed code key fobs based on the supported IC.

Please read the 3 points carefully before purchase to meet the conditions, so as not to be incompatible after purchase:

As long as you meet the following 3 conditions, our "pair copy remote control" can easily configure your remote control in 2 seconds:

The original remote control can be used normally.

The original remote control must be 433M, and it can be copied only after the code is cleared successfully.

The coding IC of the original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240, etc.

2 Pack Universal Remote Control, Fixed Code, with Frequency of 433.92 MHz

Clone Key Remote Car Key Fob Wire Universal Cloning Gate Garage Door Car

Universal Wireless Cloning Key Fob for Car Garage Door 433.92mhz

Scope of use

Applicable to automobiles, garage doors, gates, skylights, car/motorcycle alarms, home security products, short-distance wireless remote control products, home automation electrical appliances/lamps, industrial control products, etc.

Corrosion-resistant Material

Small and convenient, easy to use

Electric Remote Cloning Gate For Garage Door Universal Remote Control

Copy method:

Easy-to-use 4-channel remote control system to set the one-key anti-theft/anti-theft device, allowing you to control your device, car, home and garage.

To restart before copying: Press two buttons on the remote control at the same time until the LED flashes, indicating that the restart is successful. After resetting, press the button on the remote control and the LED will go out.

Copy: Position the product correctly before copying. Place the original remote control and the copier remote control on the desktop. Press the copier remote control with your right hand until the LED turns on and off. This indicates that the copy state is enabled. With your left hand, press the button on the original remote control. A quick click on the LED on the remote control indicates that the copy is successful. The copy method is the same as for multiple keys

Tips:

If you accidentally reset the copied remote control code and want to restore it, you can press both buttons at the same time without releasing it. If the LED indicator lights up and then goes out, do not release it until the LED indicator flashes to indicate recovery. It was a success.

Universal Wireless Car Garage Door Alarm Remote Control 433MHz

Fixed Frequency:

This remote radio key has a fixed frequency clone (433.92MHz) to copy 99.99% of commonly used fixed remote controls and learning code remote controls.

Can pass through walls, floors and doors, steadily control the receiver from any place within a reliable distance. The wireless remote control switch can be widely used in wireless short and long range arm/disarm devices, control burglar alarm panels, elevators, boats, motorcycles, vehicles, cars, trucks, RVs, power generators, etc.

2 Pack

Comes with two garage door opener remote controls, you can give another remote control to your family who needs it; It is a good choice for families where both couples need to drive in and out of the garage.

Features:

Color: Black

Rated Voltage: 12V

Rated Current: 0.3A

Operating Frequency: 433MHz

Remote Control Range: Up to 50 meters.

Package Content: 4 x Remote Key Fobs.