Set of 7 pieces: Desoldering pump and desoldering braid for removing solder

High-efficiency soldering suction cup - the desoldering pump is designed with a double-opening ring and a "vacuum" button; you can simply prime it and press the trigger with one hand to efficiently remove solder from the circuit board. Soldering braid with copper and rosin - 6 pieces of solder braid in 3 sizes, 2.0 mm / 2.5 mm / 3.0 mm wide, 1.5 m long, 2 pieces per size, geometrically precise weave, can be used to clean spare solder off the pin to prevent short circuits, meeting your various soldering needs. High-quality soldering suction cup - the desoldering pump is designed with an ABS body, non-slip sponge, and a nylon nozzle. High-quality ABS makes the soldering wick delicate and durable. The sponge absorbs static electricity, perspiration, and heat, while the nylon nozzle withstands high temperatures for extended use. This 7-in-1 soldering removal tool includes one soldering wick and six soldering wicks in three sizes. A versatile electronic kit, the desoldering wick absorbs the solder, and the desoldering pump quickly removes it. Wide application: the solder wick and solder pump can be used to correct errors on small PCBs, remove relays and other components from circuit boards, resolder mechanical keyboard switches, desolder old wires from devices, desolder computer parts such as motherboards, clean solder from SMD components, and more. Product Description: 7-Piece Desoldering Pump and Desoldering Wick Set. Specifications: Desoldering Pump: Material: ABS; Length: 206 mm; Diameter: 20 mm. How to use: 1: Press the piston until it locks onto the suction cup. 2: Heat the solder until it becomes liquid. 3: Place the solder suction cup near the liquid, then press the button. 4: Repeat this process if necessary. Note: * Do not disassemble the nylon suction nozzle when first receiving the desoldering suction cup to avoid leaks. * Remember to replace the black elastic band on the suction cup after pouring the liquid, then screw the nylon suction nozzle back on to ensure the suction cup can be used normally. * If you do not feel any spring pressure on the double-spring device when you press the piston, check that the nylon suction nozzle is screwed on securely. Soldering Wick Material: Copper with rosin Width: 2.0 mm / 2.5 mm / 3.0 mm Length: 1.5 m Diameter: 55 mm How to use: 1: Place the wick on the solder you wish to remove. 2: Heat the solder wick and the solderable surface with the soldering iron. 3: Remove the wick once the solder has been absorbed. 4: Cut the used wick; repeat this process if necessary. The package includes: 1 * deodorizing pump, 2 * solder wicks (1.5M x 2.0mm), 2 * solder wicks (1.5M x 2.5mm), 2 * solder wicks (1.5M x 3.0mm)