1/5

Side mounting kit for dishwashers – Compared to DWBRACKIT1 – Compatible with Electrolux and Frigid Air – 2 brackets and 4 screws included

~~£39.78~~

Of which environmental contribution £0.01 including VAT.

Sold by LinzGain Sarl and 1 other seller

Product information

Description

Ideal for many models: Our brackets are perfect for a range of FrigidAir and Electrolux™ models.
Comparable to original parts: Our dishwasher mounting brackets/side brackets are made of high-quality galvanized steel and are durable, robust, and built to last.
Value pack: Pack of 2 brackets and 4 screws for a solid product at an excellent price/quality ratio. Perfect for use with granite, marble, quartz, and other stone countertops requiring side/lateral mounting brackets (as opposed to countertop brackets).
Easy to install Quick and easy to install – Installation instructions below. Comparable to OEMDWBRACKIT1, as well as AP5645425, 154477201, 154806601, 154806602, 2691713 and PS4705063 for ElectroLux and Frigidaire.
----Operating Instructions:
1.) Turn off the dishwasher's power supply at the circuit breaker box (Absolutely essential to avoid shocks), and turn off the water supply. 2.) Remove the dishwasher from its location.
3) Remove the top fabric from the dishwasher side. Align the last hole in the bracket on the long flat part of the bracket with the screw hole. Reinsert and tighten the removed screw/a new screw provided. 4) Push the dishwasher back into place. Door open. Determine which bracket hole to use. You want to use the furthest roller that still attaches to the cabinet. If you are using holes on the smaller flat part of the bracket, see 5A-6A. If you are using a rear hole, see 5B-9B. 5A) If you are using the front hole, leave the bracket as is. If you are using the second hole, use one pair of pliers to hold the bracket in the second hole and another pair of pliers to break the front tab. Repeat: Push the dishwasher back into place. 6A) Pre-drilled screw holes to prevent splitting the wood. Screw the brackets into place using the screws provided. That's it. 5B) If you cannot use one of the two front holes on the bracket, you will need to drill a hole in the tub. Use Sharpie to mark through the hole in the back bracket of the dishwasher. Repeat: Remove both brackets. 6B) Using two sets of pliers, break both brackets before bending. 7B) Drill a 9.5 mm hole through each side of the plastic tub. Hold the plastic firmly under the mark and use a drill slowly to ensure a clean hole without damaging the tub. Clean both holes with a razor blade until smooth. 8B) Replace the brackets and the dishwasher. Pre-drill small holes in the cabinet wood, then screw in the provided screws on each side. 9B) Insert plastic plugs into each hole. Run the dishwasher and check for leaks. If leaks are present, you may need to add rubber sealant to the plastic plugs to create a seal.

Features

Brand
SNQ
Length
1 cm
Width
2 cm
Height
3 cm
Weight
200 g

Advice from

Dishwasher buying guide

Dishwashers spare you from the arduous task of washing up and are one of the most popular appliances in the United Kingdom. When buying a new dishwasher make sure to pay attention to the size, energy efficiency and any additional features to find an appliance that meets your needs. Read on to find the right dishwasher for you.

Read our guide

You are here:

Side mounting kit for dishwashers – Compared to DWBRACKIT1 – Compatible with Electrolux and Frigid Air – 2 brackets and 4 screws included

You may also like

Compare with similar items

Product information

Description

Features

Dishwasher buying guide