SIGMA SIMPLE BEVEL 36A5D + TABLE FIXING 36C4 + ANGLE GRINDER CAT DX31B

The kit includes:1x Sigma 36A5D1x Sigma 36C41x Cat DX31B Cordless angle grinder2x Cat DXB4 Lithium battery 4.0Ah1x Cat DXC4 Battery charger 4A (60 minutes charging time for 4.0Ah battery)1x Cat Modular caseSIGMA art. 36A5D Chamfer Machine for edges and accurate bevel working SIMPLE BEVEL seriesReady for angle grinder 700 - 1400W. Complete with art.72D + 72E0050 disk capacity max. 100mm/4”With spindle thread M14 SIMPLE BEVEL Precision chamfer machine on gres porcelain tiles or Marble, Granite,Glass. Sliding resting on the edge of the tile, ensures the uniformity of the bevel along the entire length of the edge worked, following exactly the physiological curves of the slab; which would not be possible with a cutter guided by a rigid guide. Bevel from 0 to 12 mm ( from0 to 6mm on porcelain gres) Adjustable to any angle from 22 ° to 90 °. The BULL is obtained with multiple passes at different angles. (r. 6 native). Allows finishing of the lateral edge of the tile (max.30mm)..The machine 36A5D is suitable for the following processes:• Finishing and polishing of lateral edge on tiles, cut with blade. 2 to 30mm thick tiles. Machining at 90°. Using grinding wheel art. 72E0200/-0800/-1500• Bevel , finishing and polishing of tiles edge, cut with blade. Angle 22°÷90°. Back miter width 1÷4mm, on gres porcelain material, Using grinding wheel art. 72E0050/-0200/-0800/-1500• Creating BULL NOSE on tiles edge, cut with blade. BULL width: 3÷7mm, on gres porcelain material, Using grinding wheel art. 72E0050. (For large bullnose, we recommend Art. 37A2D)• Finishing and polishing of tiles edge, previously chamfered with blade. Angle 22°÷90°. Chamfer width: 1÷18mm on gres porcelain material. Using grinding wheel art. 72E0200/-0800/-1500• Beveling, Finishing and polishing of tiles edge, cut with blade. Angle 22°÷90°. Bevel width 4÷18mm.All materials: roughing grindstone Article 72, with multiple steps 3mm deep. Finishing and polishing with grinding wheel art. 72E0200/-0800/-1500. (For large bullnose, we recommend Art. 37A2D)Sigma 36C4: Table fixing kit for bevel skirting for Sigma SIMPLE-BEVELBRUSHLESS ANGLE GRINDER CAT DX31BTechnical specifications:Voltage: 18VRevolutions per minute: 8500 / minShaft thread: M14Disco hole: 22.2mmDisco size: 125mmMachine weight: 1.85kgFeatures:Brushless motorSoft start, overload protection and electronic brakeLock switch to prevent accidental startingErgonomic design and handle with rubber coating and toggle switchQuick adjustment of the safety guard without toolsAnti-vibration auxiliary handle for operator comfort and safetyDust resistant with mesh filtersKey holder on the auxiliary handleAccessories:1pc auxiliary handle with service key1pc cutting protection cap1pc grinding protection cap