Silverline Harmonic Balancer Puller Kit 13pce - 13pce

I used it to deposit a magnetic flywheel outboard Yamaha 50 hp 4 stroke .Product useful but provide additional screws or threaded rod because several screw threads delivered are not ISO. the central black screw has a rolled thread that is not uniform throughout its length (can be a defect on my screw delivered?). Fortunately my range of use corresponded to the correct thread. however, I managed to do my removal

I used it to extract the alternator rotor of a motorcycle. He was damn tight the guy, and I managed without problem. And especially at 1/4 of the price of the 3-axis recommended to get there. . .

The product melted in two from the first use on the extraction of an alternator pulley

Solid, would not have been a problem if there had been thinner screws to the length of the larger ones. The little ones do not really have any more interest, so it's a shame. I do not recommend to open a 2-stroke motorcycle engine. The equation between the position of the holes on the crankcase, the end of the crankshaft, the width of the tip, and the length of the screws prevents the use of the tip, and therefore to center, which creates a risk of damage on the crankshaft. It took me a good hour of patience and repeated cropping. I ended up getting there, but if the thin screws had been longer I would not have had a problem, and if the tip was not as big or integrated with the central screw, I would not have had worry.

Correct tools, seems well thought out. Perhaps not in great professional quality, but sufficient to perform well what it is designed for. For me it's OK.

motorcycle rotor puller