SILVERLINE PIPE THREADING KIT 5PC BSP THREAD CUTTING STEEL GALVANISED 868556 NEW

Well received, as described. The first tests are conclusive (with cutting oil). Usage will tell if the combs hold.

Good quality for the price; allows to thread galvanized steel tube for water without difficulty with a satisfactory result

Material delivered with 24h in advance well packaged so nothing to say about it. The tool itself !!! I hope for you that you have good arms, I had too much die to break, after having redone a new piece the tool is as a whole correct.

Fortunately I saw somewhere that you had to put cutting oil (in very small print on the cardboard)! In fact I used shooting oil. It's hard, but it works well. Not even a drawing or photo to see which side to thread the die on the tube ... At first it shocks because the tube does not fit ... It must be introduced from the back (the red side and not the side of the stainless steel cup). It is better to start with a test to see the efforts at stake (quite important) and the dynamics (very slow, which leaves time to fill the dies with oil)

I made about twenty threads in all (1 / 2,3 / 4) Walking very well provided to return well to break the chip as soon as it forces too much, and well lubricate with cutting oil A little game everywhere and nets made are not very beautiful, but if like me you use it from time to time is perfect for the price

Ratchet handle a little short, we must provide a significant effort at the end of the net