Single-function time delay relay with 2 SPDT outputs, 0.1 s to 10 days, electronic power timer AC/DC 24-240 V GRT6-A2

Features: 1. FUNCTIONS AND EFFECTS: The single-function timer relay is a time switch and can be used to turn off a heater after the pump's cool-down time, or as a fan switch. 2. Timing Support: Electronic power-on timer, single-function relay, time can be set via a potentiometer, stable and reliable, you can use it with confidence. 3. TIME RANGE: The single-function timer relay is suitable for applications requiring specific functions and time settings. The time range is from 0.1 seconds to 10 days and is divided into 10 ranges. 4. DISPLAY AND INSTALLATION: The relay's operating status is clearly displayed by the LED indicator. DIN rail mounting, very convenient. EASY TO SET: The delay can be set directly via the panel button, convenient and intuitive, useful and practical, offering great convenience for your life. Specifications: Item Type: Single Function Time Relay Function: Delay on Power Terminals: A1-A2 Voltage Range: AC DC 24-240V (50-60Hz) Load: AC 0.09-3VA; DC 0.05-1.7W Supply Voltage Tolerance: -15%; +10% Power Indication: Green LED Time Range: 0.1s-10 days, ON, OFF Time Setting: Potentiometer Time Deviation: 10%: Mechanical Adjustment Repeat Accuracy: 0.2%: Set Value Stability Temperature Coefficient: 0.05% ℃, at 20 ℃ (0.05% ℉, at 68 ℉) Output: 2 x SPDT Current Rating: 10A AC1 Switching Voltage: 250VAC, 24VDC Minimum DC Capacity: 500mW Output Indication: Red LED Mechanical Life: 10,000,000 Electrical Life (AC1): 100,000 Reset Time: Maximum 200ms Operating Temperature: -20 ℃ to +55 ℃ (-4 ℉ to 131 ℉) Storage Temperature: -35 ℃ to +75℃ (-22℉ to 158℉) Installation or DIN rail: Protect class EN/IEC60715 Protection class: Front panel IP40, Terminal IP20 Operating position: Any Overvoltage category: 3 Maximum cable size (mm²): Solid wire max 1x2.5 or 2x1.5; with sleeve max 1x2.5 (AWG12) Tightening twist: 0.4 nm Package list: 1 x Time delay relay 1 x User manual Note: 1. The product must be installed by a qualified electrician. 2. All electrical connections of the product must be compliant. 3. All electrical connections of the product must comply with the appropriate safety standards.