Smart WiFi Switch, Home Security Device, Remote Control by Mobile Phone, 3 Sync Modes for Home Appliances (25A)

Smart WiFi Switch, Home Fuses, Mobile Phone Remote Control, 3-Way Sync for Home Appliances (25A) Monitor the working status of devices remotely: Define the on/off status of devices in various scenarios and remotely monitor the real-time status of home appliances. Smart Home: Monitor the usage of all home appliances and control and schedule them remotely to make your life smarter. 3 Sync Modes: Sync Mode/Countdown Mode/Cycle Sync. You can schedule the time to turn on the air conditioner before leaving the working area or other equipment. High-quality material: Copper has good electrical conductivity, while PA66 is flame retardant and high temperature resistant, increasing operational safety. Safe to use: Equipped with colored indicator lights, the operating status is visible at a glance. Intelligent protection, easy to use, reliable, supports short circuit protection, overload protection, etc. Illumination Description: 1. The LED indicator is constantly lit blue, indicating that the switch is on. 2. The LED indicator is off, indicating that the switch is off or in island mode. (In island mode, the manual switch has no status indicator; observe operating safety regulations.) 3. The LED indicator flashes blue slowly, indicating that the product is in pairing mode. Step: 1. Connect the cable from the top end of the circuit breaker to the bottom end. Make sure the wiring is correct and the Wi-Fi signal is strong. 2. Enable Bluetooth and Wi-Fi on your smartphone, open the app and press and hold the power button. Wait about 5-10 seconds; the LED will slowly flash blue. 3. After a short wait, a pop-up window will appear. Tap the plus sign (+) in the upper right corner, then select the "Add Device" button and wait for the device to be detected. 4. Enter the Wi-Fi password and tap "Next". Then wait for the network connection to be established. 5. Connect to the network. Specifications: Item Type: DIN Rail Circuit Breaker Material: Copper, PA66 Application: Smart Home Control Panel Color: Black Application Area: For Smart Elevators Rated Operating Voltage: AC 230V Control Type: Remote Control, Manual Number of Poles: 1P+N (N-pole switched) Control Method: For SigMesh/For ZigBee Rail: DIN35 Size: Approx. 82x68x18mm/3.23x2.68x0.71in Package Contents: 1 x DIN Rail Circuit Breaker