Solar Charge Controller with LCD Screen, Dual USB, DC 12V-24V, 30A Discharge Control Regulator

Features:1.The large LCD screen can display the charge and discharge current, cumulative energy generation, and discharge power request, etc.
2.Features overcurrent, short-circuit, open-circuit, and reverse connection protection, all of which are self-recovering without damaging the controller.
3.Dual USB output allows a maximum current of up to 2.5A and also supports iPhone charging.
4.Features comprehensive 3-stage charging management, making charging control more convenient and efficient.
5. Uses an industrial-grade main control chip, a reverse-current protection circuit, and ultra-low heat generation.
Specifications:Item Type: Solar Charge Controller
Material: Plastic
Application: Suitable for small solar systems for households, industries, and businesses.
System voltage: 12V/24V
Maximum photovoltaic voltage: 23V for 12V battery; 46V for 24V battery.
Boosted charging voltage: 14.4 V
Float charging voltage: 13.7 V (default, adjustable)
Discharge cutoff voltage: 10.7 V (default, adjustable)
Discharge recovery voltage: 12.6 V (default, adjustable)
Charge recovery voltage: 13 V
Light-controlled on threshold: 8 V PV panel (light-controlled on has a delay)
Light-controlled off threshold: 8 V PV panel (light-controlled off has a delay)
USB output: 2 USB outputs, 5 V/2.5 A (maximum).
Standby current: Operating temperature -35 ~ 60 ℃

Package list:1 x Solar charge controller1 x User manual
Note:1. This controller automatically recognizes 12V/24V.During initial installation, ensure the battery has sufficient voltage for the controller to recognize the correct battery type.2.Install the controller as close as possible to the battery to avoid voltage drops caused by excessively long wires, which would affect the correct voltage reading.3.This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.).4.This controller can only use photovoltaic panels as a charging source.Do not use DC or other power sources as a charging source.5.The controller will become hot during operation; please ensure it is installed on a flat, well-ventilated surface.