Solar-powered ultrasonic cat repellent, adjustable frequency, for outdoor use, to repel pests, garden protector

Product size: 15 × 6 × 16 cm. Product weight: 0.4 kg Rated voltage: 5 V 500 mA (V) Rated frequency: 20 (Hz) Rated power: 5 (width) About the product: 1. The product uses an infrared pyroelectric sensor. The sensor's sensitivity to the animal is related to the direction of the animal's movement. It is insensitive to radial movements and more sensitive to lateral movements. This means: If the animal is stationary or approaches the product in a straight line without lateral movement, the infrared light cannot be detected and the product cannot affect the animal. 2. Using the principle of infrared detection, when a small animal is detected, it emits ultrasonic waves to drive the animal away. It helps protect your property, garden, and yard from stray dogs, cats, and other small animals. Since it's a portable design, it can be installed anywhere in your home, garden, or yard. This product operates on low-voltage power supplies and batteries. It only repels animals and contains no chemicals. It emits ultrasonic frequencies. They are chased away and do not harm humans. 5 Frequency Adjustment Levels: Speed ​​0: Off Level 1: 13.5 kHz–19.5 kHz, primarily for mice, dogs, rabbits, foxes, mink, and other animals. Level 2: 19.5 kHz–24.5 kHz, primarily for cats, raccoons, badgers, skunks, and other animals. Level 3: 24.5 kHz–45.5 kHz, primarily for bats, birds, mice, and other animals. Level 4: The LED flashes strongly, which can deter snakes, raccoons, wild boars, mink, and other animals. animals. Fifth speed: The LED light bursts at 5.50 kHz, guiding animals across the entire band, and the light flashes. All functions operate simultaneously, and the frequencies from speed one to speed five operate sequentially, accompanied by the powerful flash of the DIRECTED. Instructions Function Description "Sensitivity" knob (left): Sensitivity and detection distance are adjustable. Turn the knob clockwise to gradually increase the protection range. Frequency knob (right): This knob is used to adjust the ultrasonic frequency. Turn the knob clockwise, and the ultrasonic frequency gradually increases. Installation Precautions 1. Open the battery compartment cover on the back, install 3 AA rechargeable batteries, then close the battery compartment cover. 2. Place the product in the area to be protected. (Such as flowerbeds or walls, etc.) 3. Please choose a suitable location to ensure that the top solar panel can absorb maximum solar energy. 4. If the product is to be installed underground, carefully insert the ground stake into the soil. Please extend the ground stake approximately 12 cm from the ground. It is recommended to carefully insert the product after digging a hole in the ground to protect it from damage. 5. The product can be inserted into the ground, hung on a wall, or placed on other flat surfaces.