1/5
Spare parts for Genius remote controls, 433.92 MHz for 4-channel garage door openers, compatible with GENIUS ECHO TX4 433 RC, ECHO TX2 433 RC, TE443H BRAVO
Sold by HYPERDROP
You may also like
Compare with similar items
Product information
Description
Universal Compatibility – Compatible with ECHO Genius TX4 433 RC, ECHO TX2 433 RC, and BRAVO TE443H remote controls operating at 433.92 MHz. For optimal performance, ensure your original remote operates at the same frequency. Multi-Channel Control – With 4 independent channels, this remote allows you to open and close gates and garage doors with a single device, providing maximum convenience. Important Note – Please carefully check compatibility before purchasing. If your model is not listed, the remote may not function correctly. Ready to Use – The remote comes with lithium batteries, so you can use it right away. Customer Service – Our professional customer service team is always available to answer your questions and resolve any issues. Universal Compatibility – Compatible with ECHO TX4 433 RC, ECHO TX2 433 RC, and BRAVO TE443H operating at 433.92 MHz. Please ensure your original remote control operates on the same frequency for optimal functionality. Multi-channel control – With 4 independent channels, this remote allows you to open and close gates and garage doors with just one device, providing maximum convenience. Important note: Please carefully check compatibility before purchasing. If your model is not listed, the remote control may not function correctly. Ready to use right out of the box – The remote control comes with lithium batteries and is ready to use immediately. Customer service – Our professional customer service team is available to assist you with any questions or issues. Description: Programming: Programming via the receiver. Pulses: 4 pulses. Frequency: 433.92 MHz. Battery: Built-in battery. Range: 10–50 m (outdoors). Material: Metal and ABS. Code: Rotary code. Caution: Not compatible with 868 MHz. Ensure your remote control is listed in the compatibility list.
Programming
Receiver Code.
1 - On the receiver, press the button for the channel to be coded – SW1 for CH1 and SW2 for CH2. LED 1 or LED 2 will light up.
It will remain lit to indicate that the receiver is in learning mode.
2 - Within 10 seconds, press and hold the button to be coded on the remote control for at least 1 minute.
For at least 1 second.
3 - If programming is successful, the LED will blink twice.
4 - Once the first remote control is coded, the receiver will remain in learning mode and the LED will remain lit.
5 - To code additional remote controls (maximum 256), repeat the steps in section 2.6. After 10 seconds have elapsed since the last remote control was coded, the receiver will automatically exit the learning phase. The learning process can be manually interrupted by pressing one of the receiver buttons (SW1 or SW2) after the remote control has been saved.Features
- BrandCATHERINE
- ColourDark Blue
- Voltage220 V
- NF certificationNF138
- Power sourceBatteries
- Height5 cm
- Amperage10 A
- Width5 cm
- Length5 cm
- Compatible brandEcho
- MaterialMetal
- Number of channels4
- Weight100 g
- Power20 W
- Motorisation accessory typeRemote-control
- ControlRemote-control
- Type de perçageSingle hole
- Motorization useGarage
- ManoMano ReferenceME97972424
- MMID664920799870
- Product codeHD129C-1219221
- EAN3773584102428
You are here:
'/%3E%3C/svg%3E){kind=small}