Street Coilovers for VW Polo Mk5 2009-2018 6R 6C 1.2 1.4 TSi 1.6 1.8 GTi Ibiza
Recommended Price
Product information
Description
Notice:No Top Mount Included
Application:
for VW
For VW Polo MK5 6R/6C 03/2009- hatchback
For Seat
For Seat Ibiza MK4 6J5, 6P1 03 / 2008-12 / 2017 hatchback
For Seat Ibiza MK4 SPORTCOUPE 6J1, 6P5 06 / 2008-12 / 2018 coupe
For Seat Ibiza MK4 ST 6J8, 6P8 03 / 2010-07 / 2016 station wagon
For Audi
For Audi A1 8X 8X1, 8XK 05 / 2010-10 / 2018 hatchback
For Audi A1 Sportback 8X 8XA, 8XF 09 / 2011-10 / 2018 hatchback
For Skoda
For Skoda Fabia NJ 2014-2022
Specification:
Adjustable height: Front lowering 30-85mm (depends on the vehicle models)
Adjustable height: Rear lowering 30-70mm (depends on the vehicle models)
Damping : fixed daping
Top mounts: Front and rear OE top mounts required
Spring rate Front: 8 kg/mm (448 lbs/in)
Spring rate Rear: 3.5 kg/mm (196 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 63-64 mm
Spring length Front: 170 mm
Spring length Rear: 225 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm
Shock type: Twin tube
Warranty: 2 Years
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Dimension
Package size : 70*50*20 cm
Weight: 20000 g
Feature:
1. lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Notice:
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandMAXPEEDINGRODS
- Shock absorber onlyNo
- ManoMano ReferenceME279889170
- MMID382646760772
- Product codeD8F4HW
- EAN6941477740461