Submersible pump, small battery, solar pool cleaner, 8-meter lifting cable, 2.1-meter DC

Main features: 1. The outlet diameter is 1 inch (25 mm) and the maximum lifting height is 8 meters, which can be used for batteries and solar panels. 2. Newly improved, high-quality rotor with excellent copper wire, 100 improved heat sinks, high-temperature resistance, long service life, sufficient power, and long-term operation without burning out the machine. 3. Using thickened stainless steel processing, it has a beautiful appearance, light weight, corrosion resistance, rust resistance, robustness, and durability. 4. Ideal solution for remote irrigation needs without electricity, such as watering gardens and farms, and filling water tanks. 5. Suitable for drainage in shipping, aquaculture, livestock farming, industrial, and mining enterprises. Wonderful water pumps for all freshwater tank drainage, waterfalls, small ponds and swimming pools, used with solar panels and battery systems. Specification: Item Type: Submersible Pump Power: 180W (12V) / 220W (24V) Body Material: Expandable Metal Body: Electroplating treatment, rustproof Motor Material: Copper Filter Material: Iron Maximum Lift: Approx. 8 meters/26.2 feet Maximum flow rate: 3000 l/h Maximum depth: Recommended maximum depth of approximately 6 meters/19.7 feet Cable length: Approximately 2.1 meters / 6.9 feet Maximum operating temperature: Recommended within 40 degrees Celsius Connection water hose diameter: Approximately 2.5 cm/1 inch Applicable scenarios: Suitable for various scenarios such as freshwater tanks, waterfalls, small ponds, swimming pools, yachts, and ship drainage How to use: 1. Insert the water hose into the clamp. 2. Then use a screwdriver to secure the clamp. 3. Place the water hose onto the water inlet of the water gun and secure it with the clamp. 4. Place all the pumps in the water. 5. Take power from the clip's battery; the red wire is the positive terminal and the blue wire is the negative terminal. 6. Normally, the treated water is used for watering flowers and Vegetables, washing cars, and watering farmland. Package list: 1 x submersible pump (without plug) 1 x user manual Note: 1. The red wire is positive and the blue wire is negative. Before use, check if the power supply voltage is compatible with the electric pump. The acceptable error is 5%. The electric pump is connected to a generator and protected against power surges. Disconnect the household voltage. 2. Do not use cables to lift the electric pump. 3. The electric pump should not be operated without water. After use, the electric pump should be moved to a well-ventilated and dry location. 4. If there is debris or other matter in the water source, the electric pump should be used in an environment free of debris to prevent blockages. 5. When the electric pump has been running for 500 hours, it should be disassembled for maintenance. Check the seals, clean the dust from the electric switch brush, and replace the grease in the bearing and electric brush. It is best not to extend the electric pump cable. It is preferable to connect the cable directly to the battery. Please pay particular attention to the positive (+) and negative (-) terminals. If the pump is too low, replace the positive (+) and negative (-) terminals.