Surecom SW-102 Digital VHF/UHF 125-525MHz Antenna Power and SWR Meter

VSWR. Direct digital reading of forward and reflected power, no calibration required. NOTE: Not compatible with digital radio (e.g., DMR digital radio).

The SW-102 digital SWR meter is designed for optimal performance in the popular amateur radio bands VHF (144-148 MHz) and UHF (430-450 MHz). It provides its most accurate readings for standing wave ratio (SWR) and RF power output, essential for setting up and maintaining efficient antenna systems. Maximum measurable power range up to 120W.

The structure at Low insertion loss (0.3 decibels or less) allows for permanent connection. N-Type Basic Connectors: Featuring robust N-type female ports for high-frequency accuracy and durability. Comes with 2 N-Type to SO239 adapters – ready to connect to most radios and ham antennas! If your device uses connectors other than N-Type or SO239 (e.g., BNC, SMA, PL-259, TNC), additional third-party adapters are required and are not included. Frequency Range: 125–525 MHz. NOTE: The ground plate is not included.
Note: The screen comes with a protective film attached to the screen to prevent scratches during shipping. Please inspect carefully and remove the protective film before your first use for best display performance. Note: The meter can measure CW, AM & FM only; it cannot measure RTTY and SSB.

NOT for CB radio: This SWR meter is NOT compatible with CB radios operating on CB channel frequencies below 27 MHz. It is designed for higher VHF/UHF bands. Ensure compatibility with your radio's frequency range before purchasing.