Surge Protector, High Precision 2-Pole DC 600V Surge Protective Device for Photovoltaic Systems

MATERIAL: PC (fireproof). Increases operational safety, is flame retardant, withstands higher loads, improves performance, and ensures an optimized user experience. HIGH VOLTAGE PROTECTION: 2.8 kV. In the event of a surge caused by lightning or other sources, the surge protector opens in nanoseconds and diverts the surge to ground to protect the power supply. MAIN FUNCTION: This surge protector protects the AC power grid from lightning and surges. STABLE PERFORMANCE: A precision chip inside ensures accuracy and high conductivity. EASY INSTALLATION: The surge protector mounts via a 2-prong DIN rail, making it very easy to install. It mounts to a standard 36 mm DIN rail and a distribution box with a circuit breaker.

2-Pole Surge Protector for Photovoltaic Systems, 600V DC Surge Protector, 2-Pole Photovoltaic Surge Arrester, Electrical Protection Devices. Specifications: Item Type: Surge Protector, Model: CHLT40PV, Material: PC (Flame Retardant), Maximum Continuous Operating Voltage: 600V DC, Rated Charging Current: 20kA (8/20s), Maximum Charging Current: 40kA (8/20s), Upper Protective Voltage: 2.8kV, Protection Class: IP20, Operating Temperature: -40 to 80°C, Operating Humidity: 90% (average 25%).
Package Contents: 1 x 2-Pole Surge Protector, 1 x Sliding Cover.


Note: 1. The power must be turned off before installation and commissioning. Powering is strictly prohibited. 2. Connect the devices according to the installation diagram. + is the positive terminal, - is the negative terminal. Make sure the polarity is correct. After installation, turn off the circuit breaker (fuse) and verify that the circuit is functioning normally.