1/5
Tarauds combinés, 6 vis 1/4 '' HSS M3-M10, fraises à queue hexagonale, outils, jeu de perceuses, tarauds de machine.Utilisé pour le bois, le plastique, l'aluminium fin, le métal dur
Sold by re-green GmbH and 1 other seller
You may also like
Compare with similar items
Product information
Description
General descriptionThese combined taps and drills are designed for efficient drilling, tapping, cutting, deburring, and milling in wood, soft metals, fine aluminum sheets (5-6 mm), and iron. The set includes 6 taps ranging from M3 to M10, allowing for versatile threading applications. The self-centering point eliminates the need for assisted center drilling or punching, enhancing ease of use and precision.Technical specificationsMaterial: High-speed steel (HSS)Hex shank: 6.35 mm (1/4")Metric thread sizes: M3, M4, M5, M6, M8, M10Pitch: 0.5 mm, 0.7 mm, 0.8 mm, 1.0 mm, 1.25 mm, 1.5 mmQuantity: 6 tapsInstallationUse on a threading machine, such as a lathe.UsageWhen drilling, inject water simultaneously to cool the drill bit.If cooling is not possible, maintain a lower drilling speed and avoid frequent drilling.Drilling and tapping can be performed in a single step, saving time and improving efficiency.Other informationThe taps are treated with nitriding for enhanced hardness and rust resistance.The spiral cone design prevents thread damage from excessive drilling.
Features
- BrandTRIMEC
- Weight200 g
- MaterialHSS
- Metric thread not standard threadM10 / M3
- Pcs per pack6
Advice from
Taps and dies buying guide
Taps and dies are essential to make or re-thread a screw, a nut or any other mechanical element. The three-piece tap sets are the most commoly used and the tap wrench is as important as the die stock for a proper tapping. Drilling is required before tapping.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}