Temperature controller, reliable and durable thermostat with probe, factory incubator control for

Features:

1. Uses an MCU control system and a highly accurate temperature detection probe.
2. This product uses a three-window display design, which can display the start and stop values ​​in real time.
3. It has other functions such as intermittent operation, timer, etc.
4. It can be widely used in various applications: incubator, factory temperature control, incubator temperature control, etc.
5. Energy-saving, safe, and easy to use.

Specifications:

Features:
Uses an MCU control system and a highly accurate temperature detection probe.
This product uses a three-window display design, which can display the start and stop values ​​in real time. It has other functions such as intermittent operation, timer, etc. It can be widely used in multiple situations: incubator, factory temperature control, incubator temperature control, etc. Energy saving, safe and easy to use.
Specifications:
Rated Voltage: 12V
Maximum Current: 10A
Maximum Power: 2200W
Size: 9 x 6 cm / 3.54 x 2.36 inches
Three Modes: Intermittent Work, Timer On and Timer Off Temperature Measurement Range: -55 ~ 120 degrees
Measurement Accuracy: ± 0.3 ℃
Control Accuracy: 1 ℃
Delay Time Control Range: 0 to 99 hours, 99 minutes br>Measurement input: NTC (10K0.5%)
Input voltage: 12v/24v/220v
Display color: red and yellow
Temperature control range: -19 ~ 99 degrees
Temperature compensation range: -20 ~ 20 ℃
Button
Press F-1 Intermittent work mode F-2 Timer off mode F-3 Timer on mode
Long press hibernation mode. Press the setting button again, turn on the temperature controller.
Add a discount: F-1 Intermittent work mode, set the start temperature. F-2 Timer off mode, the countdown unit is in hours. F-3 Timer on mode, the countdown unit is in hours.
Add a discount: F-1 Intermittent work mode, set stop temperature. F-2 Timer off mode, the countdown unit is in minutes. F-3 Timer on mode, the countdown unit is minutes.
Press and hold in case of power failure. Enter the set temperature calibration mode.
Press and hold in case of power failure. Restore factory settings.
Package included:
1 x Digital Temperature Controller