Thermostatic valve for domestic water heater, thermostatic valve tap, six-point shower tap

The valve is used to mix hot and cold water to control the water temperature and maintain it within a certain range. Functionality: With this thermostatic valve, you can easily control the amount of hot and cold water and adjust the water temperature to your needs. Press and hold the red safety button to control the temperature above 38°C. There are filters on the hot and cold water connections to protect the water from impurities. Made with a solid brass valve core, it is durable, sturdy, and rust-resistant. The wall-mounted thermostatic bath mixer is easy to install and works with many water heaters. A built-in temperature control safety device automatically shuts off the hot water when there is no cold water to prevent scalding. Specification: Working pressure: 0.05-1 MPa Recommended pressure: 0.1-0.5 MPa (pressure above 0.5 MPa requires an air relief valve) Standard pressure: dynamic pressure 0.3 ± 0.02 MPa Cold water supply temperature: 4°C-29°C Hot water supply temperature: 55°C-85°C Recommended normal operating temperature: 60-70°C Water temperature control range: 20°C to 50°C Safety button temperature: 38°C Six points (SC-GD04, 25 mm)