Three-in-one soil analyzer – pH, moisture, light intensity – battery-free – dual needle sensor technology

About this product:

[Soil Tester]: This 3-in-1 soil pH tester allows you to scientifically measure the light, moisture, and pH of your soil. This allows you to adapt environmental conditions to promote plant growth.

[Portable Design]: This soil moisture tester requires no batteries; simply insert the probe (at least 10 cm deep) into the soil to obtain accurate readings. Lightweight and portable, it is easy to carry outdoors.

[3-in-1 Features]: This 3-in-1 soil tester is ideal for the care of gardens, shrubs, flowers, vegetables, plants, etc. Its dual-needle technology significantly improves the speed and accuracy of soil pH measurement and analysis.

[Scientific Accuracy]: Readings of moisture, pH, and light intensity are simple and precise.

This 3-in-1 soil tester measures soil moisture (from 1 to 10), light intensity (from 0 to 2000), and pH (from 3.5 to 8).

[Note]: This soil tester is not designed to measure the pH of water; it is intended exclusively for soil analysis. Please wipe and clean the metal probe after each use.

Product Description: Color: Green. 3-in-1 soil tester (pH/moisture/light intensity). Instructions:

1. Select the moisture/pH/light intensity mode as needed.

2. Insert the probe two-thirds of the way (at least 10 cm) into the soil.

3. Adjust the probe until the needle vibrates slightly.

4. Check the humidity, pH, and light levels on the device after 10 minutes.

5. Remove the probe from the soil and wipe it clean after each use.

6. [Humidity] Values 1 to 3 indicate a need for watering, 4 to 7 moderate humidity, and 8 to 10 overwatering.

7. [Light] The measurement range is 0 to 2000. Higher light values indicate a stronger light intensity, depending on the plant's shade requirements.

8. [pH] Corresponds to a scale of 8 to 3.5, with 7 being neutral. Lower values indicate more acidic soil.

9. Works without batteries.

Note: Do not push the device into very hard soil or allow it to come into contact with hard objects.

Do not use to test pure water or other liquids.

Do not bury the device for an extended period. If the soil is too dry and the indicator does not move, water the soil before testing.

The pH value of this instrument is between 8 and 3.5. If the alkalinity of the soil being tested is above 8 or its acidity is below 3.5, the device may not function correctly, as its operating range is limited.

Package Contents: Soil pH/Moisture/Light Tester *1