Tile cutter SIGMA J-PRO + waterkit 87E4+458 + grinder CAT DX37

The kit contains: 1x Sigma J-Pro 37B2D 1x Sigma Waterkit 87E4 1x Sigma 458 extra fixing for Waterkit 87E4 1x Cat DX37 SIGMA J-PRO 37B2D With J-Pro equipment you can perform precision "Jolly" on tiles and slabs. By sliding to rest on the edge of the tile or slab (stoneware, marble, granite, etc.), it guarantees uniformity of the cut along the entire length of the worked edge, exactly copying the physiological curves of the slab; something that would not be possible with a cutter guided by a rigid guide. The J-Pro machine is designed to be fixed to a work surface, allowing you to work even small and narrow tiles such as skirting boards. Technical features: With M14 universal connection. It can process, in a single pass, tiles with thicknesses from 5 to 20 millimeters and dimensions from 30 cm to infinity. Allows 46° inclined cutting Adjusting the distance of the disc from the edge of the tile is simple and quick. It can work dry with the provision for dust extraction or wet thanks to the Water-Kit cooling system. Prepared for 700 – 1400 W grinders, complete with 75B disc, max. disc capacity. 125mm Gross weight: 5.1 kg Net weight: 3.8 kg Dimensions: 570x390x250 mm SIGMA WATERKIT 87E4 + EXTRA FIXING 458 Waterkit is the cooling system for the diamond tool with water spray (10 lt), guarantees greater speed and finish. CAT DX37 ANGLE GRINDER 115/125MM 750W Technical specifications: Voltage: 230-240V~ 50Hz Power output: 750W Disc size: 115mm Revolutions per minute: 12000/min Weight of the machine: 2 kg Characteristics: Slide on/off switch with Protection against accidental starting Tree lock Anti-vibration auxiliary handle for comfort and operator safety Soft start Dust resistant with removable mesh filters Key holder on the auxiliary handle Accessories: 1pc auxiliary handle with service key 1pc cut protection cap 1pc protective cap for grinding