Transistor Tester BSIDE ESR02 Pro Digital Transistor Tester SMD Chip Component Inductance+electronic component tester

Features:
One key operation, one start test, one key to get.
Large LCD screen with backlight function for easy reading.
Automatically test PIN items and display them on the LCD screen.
Auto detection of components such as NPN, PNP bipolar transistors, N-channel and p-channel mosfet, diodes (including double diodes), thyristors, transistors, resistors and capacitors, etc.
Specification:
Brand: binde
Model: ESR02 Pro
Resistance: 0Ω ~ 50Ω, resolution: 0.01 ohm
Capacitance: 25pf ~ 100mf, resolution: 1pf
Inductance: 0.01mh ~ 20h, resolution: 0.01mh
ESR resolution of capacitor: 0.01Ω
Battery: 1PCS x 9V 6LR61 battery (not included)
Color: black
Size: approx. 14 * 8 * 4.5cm / 5.5 * 3.1 * 1.8inch
Weight: about 214g / 7.5oz

Using instructions:
Push "Power/Test" to set up and start a test, multiple measurements can be repeated by this key, automatic power 20 seconds after measurement.
Provide three types of socket, each pin socket 1, pin 2 and pin 3 are connected.
The placement of the device does not require the order of instructions and the screen displays the component function of each pin after measuring.
There is a table "Typical ESR value of the "electrolytic capacitor" on the back, it is for guidance only, these are typical value for standard quality electrolytic capacitor at room temperature.
Calibration:
Create test pin 1, 2, 3 together and press Press the “Power/Tester” button, then the screen prompts to enter calibration, press the button again within 2 seconds to confirm. A few seconds, the screen prompts to release pin 1, 2, 3, release them and wait for finishing calibration.

Package List:
1 x Transistor Tester
1 x User Manual
Note:
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
If you use DC power supply, please choose the DC 9V ~ 12V adapter. (including 9v and 12v)
Can be powered by 9V 6LR61 battery (not included), when the battery is lower than 6V, please replace a new one.