Trimec – 4-in-1 Water Quality Meter – pH, TDS, EC, Temperature – Backlit LCD Display – 0.01 Accuracy for Pools and Aquaculture – 01--TRIM

General Description

This water quality meter is ideal for testing various types of water, including tap water, filtered water, distilled water, bottled water, well water and chilled water. It is widely used in water treatment, aquaculture, hydroponics, as well as in swimming pools and spas. Technical Data: pH measurement: 0.00 to 14.00 (accuracy ± 0.01); TDS: 0 to 9999 ppm (accuracy ± 2%); Conductivity: 0 to 9999 µS/cm; pH resolution: 0.01; LCD screen with blue backlight. Compatibility and Accessories: Package contents: 1 TDS-EC tester, 1 pH tester, 1 mineral detection pen; 3 calibration pouches and 1 leather case. Instructions for Use: Installation: Remove protective cap and immerse. Place the pH meter electrode into the solution to be tested. Press ON/OFF to turn on the device, then stir gently and wait until the reading has stabilized.

Operation

This meter is quick and easy to use: simply immerse it in the solution, stir, and get a result within seconds. No prior calibration or setup is required.