Two 940nm ToF Laser Distance Sensor Modules with I2C Interface Arduino Compatible

1.The Microelectronics is a time-of-flight telemetry system integrated into a compact module. This card is a support for the , so we recommend that you carefully read the datasheet (1 MB pdf) before using this product.
The VL53L0 uses FlightSense technology to accurately measure the time it takes for emitted pulses of infrared light to reach the nearest object and be reflected back to a detector, so it can be considered as a standalone lidar system.
3.Range measurements are available via the interface I⊃2; C (TWI) sensor, which is also used to configure the sensor parameters, and the sensor provides two additional pins: a shutdown input and an interrupt output.
4.The is an excellent IC, but its lead-free LGA package makes it difficult to use for the hobbyist.It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. breakout board solves these problems, making the sensor easier to handle, while keeping the overall size as small as possible.
5.A time-of-flight telemetry system integrated into a compact module
PIN Description:
Regulated 2.8 V output. Nearly 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8V input with VIN disconnected.)
VIN This is the main 2.6V to 5.5V power connection. The SCL and SDA level switches pull the I2C lines at this level.
GND The ground connection (0V) for your power supply.Your I2C control source must also share a common base with this board.
SDA level-shifted I²C data line: HIGH is VIN,LOW is 0 V
SCL level-shifted I²C clock line: HIGH is VIN,LOW is 0 V
XSHUT This pin is an active-low shutdown input; the card pulls it towards the to activate the default sensor. Driving this pin low puts the sensor into hardware sleep. This input is not level shifted.
color: purple + black
Material: metal
size: 25x12.2mm

Package Contents:
2 sets * Telemetry sensor module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in a little different from the real thing. The allowable measurement error is +/- 1-3 cm.