1/4

U-Bolt for 25 NB (33.7 OD) pipe. Galvanised Steel With Convex Base to Minimise Crevice Corrosion

Product out of stock

Product information

Description

General description

This U-Bolt is specifically designed for 25 NB (33.7 OD) pipes and is made from galvanised steel. Its unique convex base minimizes crevice corrosion by allowing water to roll away from the pipe, preventing it from standing in pools of water. This design is similar to I-Rod u-bolts and features a silicone tube shroud for enhanced protection.

Technical specifications

Inside Diameter: 36 mm

Inside Height: 88 mm

Leg Centres: 42 mm

Leg Length: 70 mm

Material: Galvanised Steel (A4)

Pipe Nominal Bore: 25

Suggested Pipe OD: 33.7 mm

Thread Length: 65 mm

Thread Size: M6

Overall Length of Base Rod: 57 mm

Base Rod Diameter: 12 mm

Length of Base Rod Hose: 21 mm

Rubber Specifications: Platinum Silicone Rubber

Shore A: 60

Tear B: 33 N/mm (ASTM D 624 die B)

Density: 1.16 g/cm3

Usage

The U-Bolt can be configured for either grip or non-grip applications depending on the arrangement of the nuts. For gripping the pipe, both nuts can be locked together underneath the convex base plate. For non-gripping applications, the nuts can be locked on either side of the convex base plate.

Features

Brand
GRAPHSKILL
Certification body
DIN
Material
Steel
Pcs per pack
1
Pipe clamp use
Hose clamp

Advice from

Hose clamp buying guide

Hose clamps can be used in domestic or automotive settings for clamping tasks involving car hoses, pressurised pipes, or any hydraulic or gas hose. From embossed band clamps to O clips, it's important to pay attention to pressure ratings, environment of use and steel W grades. Read on to find the right hose clamp.

Read our guide

You are here: