Ultrasonic solar cat repellent, adjustable frequency, for outdoor use, to repel pests, garden protector

Description

Product size: 15 × 6 × 16 cm.

Product weight: 0.4 kg

Rated voltage: 5 V 500 mA (V)

Rated frequency: 20 (Hz)

Rated power: 5 (width)

About the product:

1. The product uses an infrared pyroelectric sensor. The sensor's sensitivity to the animal is related to the direction of the animal's movement. It is insensitive to radial movements and more sensitive to lateral movements.

This means: If the animal is stationary or approaches the product in a straight line without lateral movement, the infrared light cannot be detected and the product cannot affect the animal. 2. Using the principle of infrared detection, when a small animal is detected, it emits ultrasonic waves to deter the animal. It helps protect your property, garden, and yard from stray dogs, cats, and other small animals. Since it is a portable design, it can be installed anywhere in your home, garden, or yard. This product operates on low-voltage power supplies and batteries. This product only deters animals and contains no chemicals. It emits ultrasonic frequencies. They are chased away and do not harm humans.

5 Frequency Setting Levels:

Speed 0: Off

Level 1: 13.5 kHz - 19.5 kHz, mainly for mice, dogs, rabbits, foxes, mink, and other animals.

Level 2: 19.5 kHz - 24.5 kHz, mainly for cats, raccoons, badgers, skunks, and other animals.

Level 3: 24.5 kHz - 45.5 kHz, mainly for bats, birds, mice, and other animals.

Level 4: The LED flashes strongly, which can chase away snakes, raccoons, wild boars, mink, and other animals.

Fifth Speed: The LED light flashes at 5.5 kHz, driving away animals across the entire band and the light flashes. All functions operate simultaneously, and speeds one through five operate sequentially, accompanied by the powerful flash of the DIRECTIONAL indicator.

Instructions

Function Description

Sensitivity Button (left): Sensitivity and detection distance are adjustable. Turn the knob clockwise to gradually increase the protection range.

Frequency Button (right): This button is used to adjust the ultrasonic frequency. Turn the knob clockwise, and the ultrasonic frequency gradually increases.

Installation Precautions

1. Open the battery cover on the back, install 3 AA rechargeable batteries, and then close the battery cover.

2. Place the product in the area to be protected.

(Such as flowerbeds or walls, etc.)

3. Please choose a suitable location to ensure that the top solar panel can absorb maximum solar energy.

4. If the product is to be installed underground, carefully insert the ground stake into the soil. Please extend the ground stake approximately 12 cm from the ground. It is recommended to carefully insert the product after digging a hole in the ground to protect the product from damage.

5. The product can be inserted into the ground, hung on a wall, or placed on other flat surfaces.