Ultrasonic Solar Cat Repeller Adjustable Frequency Outdoor Cat Repeller Repellent Pest Animals Garden Protector

Product size: 15 × 6 × 16 cm.

Product weight: 0.4 kg

Rated voltage: 5 V 500 mA (V)

Nominal frequency: 20 (HZ)

Rated power; 5 (width)

About products:

1. The product uses an infrared pyroelectric sensor. The sensitivity of the sensor to the animal is related to the direction of the animal's movement. It is insensitive to radial movements and more sensitive to lateral movements. This means: If the animal is stationary or approaches the product in a straight line without lateral movement, the infrared light cannot be detected and the product cannot act on the animal.

2. Using infrared detection principle, when a small animal is detected, it emits ultrasonic waves to drive the small animal. It helps protect your property, garden and yard from stray dogs, cats and other small animals.

Since it is a portable design, it can be installed anywhere in your home, garden or yard. This product works with low voltage power supplies and batteries. This product only drives animals and does not contain any chemicals. It emits ultrasonic frequencies. They are hunted and do no harm to humans.

5 levels of frequency adjustment:

Speed 0: disabled

Level 1: 13.5KHZ-19.5KHZ, mainly for mice, dogs, rabbits, foxes, mink and other animals.

Level 2: 19.5 KHZ-24.5 KHZ, mainly for cats, raccoons, badgers, skunks and other animals.

Level 3: 24.5KHZ-45.5KHZ, mainly for bats, birds, mice and other animals.

Level 4: LED flashes hard, which can drive away snakes, raccoons, wild boars, mink and other animals.

Fifth gear: LED light bursts at 5.50 kHz, drives animals in the full band and the light flashes. All functions work at the same time and the frequencies from speed one to speed five work in sequence, accompanied by the powerful flash of the DIRECTED.

instruct

Function description

“Sensitivity” button (left): Sensitivity and detection distance are adjustable. Turn the knob clockwise to gradually increase the protection range.

Frequency knob (right): This knob is used to adjust the ultrasonic frequency. Turn the knob clockwise and the ultrasonic frequency gradually increases.

Installation precautions

1. Open the battery cover on the back, install 3 AA rechargeable batteries, then close the battery cover.

2. Place the product in the area to be protected. (Such as flower beds or walls, etc.)

3. Please choose a suitable location to ensure that the top solar panel can absorb solar energy to the greatest extent.

4. If the product is installed underground, carefully insert the ground stake into the ground. Please extend the ground rod about 12cm from the ground. It is recommended to carefully insert the product after digging a hole in the ground to protect the product from damage.

5. The product can be inserted into the ground, hung on the wall or placed in other flat places.

-Contact our customer service in case you need further assistance