Universal 11.8-inch Natural LP Propane Push-Button Piezoelectric Ignition Kit for Gas BBQs, Stoves, Heaters, and Generators, 2-Piece Set

General Description: The universal push-button piezoelectric ignition kit is designed for propane and natural gas appliances, such as gas barbecues, cookers, heaters, and generators. This DIY kit comes in a set of two pieces and may require modifications to fit certain models. The cable length is 11.8 inches (30 cm), allowing for flexible installation. Technical Specifications Output Voltage: >=20kV Spark Distance: 3-5 mm Wire Length: 30 cm Electrode: M10*1, Length: 57 mm Straight Needle Length: 19.5 mm Head: 135 degrees, 9.0 mm Wire Resistance: 392℉ Lifespan: Over 30,000 times Installation For successful installation, it is essential to follow these guidelines: Hold the kit against a metal control panel or add a metallic material to achieve proper mono core contact. Ensure the igniter connection points are in good contact with your device body. If the igniter does not operate, check that the spark is coming correctly from the electrode pin head. Operation To operate the kit, simply press the button once to create a spark. If the power is insufficient, it is possible to use two kits simultaneously. It may be necessary to push the rod to obtain the correct spark.