Universal 11.8-inch Natural LP Propane Push-Button Piezoelectric Ignition Kit for Gas BBQs, Stoves, Heaters, and Generators, 2-Piece Set

General Description The universal push-button piezoelectric ignition kit is designed for propane and natural gas appliances, such as gas grills, stoves, heaters, and generators. This DIY kit comes in a 2-piece set and may require modifications to fit some models. The cable length is 11.8 inches (30 cm), allowing for flexible installation. Technical Specifications Output Voltage: >=20kV Spark Distance: 3-5 mm Wire Length: 30 cm Electrode: M10*1, Length: 57 mm Straight Needle Length: 19.5 mm Head: 135 degrees, 9.0 mm Wire Resistance: 392℉ Lifespan: Over 30,000 times Installation For successful installation, it is essential to follow these guidelines: Hold the kit against a metal control panel or add a metallic material to achieve proper mono core ignition. Ensure the ignition points are making good contact with the body of your device. If the ignition does not work, check that the spark is coming correctly from the electrode tip. To use the kit, simply press the button once to create a spark. If the power is insufficient, two kits can be used simultaneously. You may need to push the rod in to get a good spark.