Universal 433 MHz Remote Control for Garage Doors or Gates – 4 Channels, 12V Power Supply, Works with Common Systems – Pack of 4

Convenient: Remote control range up to 50 meters. This is a fixed-frequency remote control clone for copying common fixed-code and learning remotes with 99.99% accuracy. Clone up to 4 remote control signals from 4 different remotes.

Multifunctional: User-friendly 4-channel remote control system with anti-theft and one-button anti-theft functions, helping you control appliances, cars, automobiles, homes, and garages.

Security Control: The learning code has a high level of security due to its low repetition rate and relearning mode. This allows it to erase the old code and learn a new one if a remote is lost, so you always maintain control.

Easy to Use: Extremely easy to set up, learn, relearn, and control (see note). Stable and reliable performance with high receiving sensitivity.

Regularly control the receiver from anywhere within a reliable distance.

Wide application: Wide range of applications from simple home remote control to standalone control of windows, entryways, garage doors, alarms, security equipment, lifts, etc.

Please read the 3 points before purchasing to ensure compatibility after purchase: 1. The original remote control can be used normally. 2. Know the transmission frequency of the original remote control. 3. The coding IC of the original remote control is PT2262, PT2264, SC2262, SC2260, HS2262, 2260, LX2262, 2260, EV1527, PT2240, etc.

Press and hold both buttons (A and B) for approximately 3 seconds until the red indicator light flashes rapidly (please complete this step before proceeding to the next). Place the replacement remote and the original key as close together as possible. 3. Simultaneously press and hold one button on your original remote and one of the buttons on the replacement key until the red light on the replacement key flashes continuously. (The red light will flash three times quickly at first, then pause for one second, and then flash steadily once successfully cloned.) Programming is now complete! If you wish to program more buttons, simply repeat step 2. To reset the remote, start again from step 1. 5. If you accidentally reset your replacement remote, simply press the two bottom buttons (C and D) for approximately 3 seconds until the red light flashes rapidly. What's included: 3 x Remotes

Sold by Grid Cool Store