Universal Adapter Kit for Intex Pool Hoses - 40mm to 1.5 Inch (38mm) Converter - Compatible with Ref. 4560 and Others

Introducing the Universal Adapter Kit

This ingenious adapter kit is the perfect solution for connecting your Intex above-ground pool (equipped with standard 40mm hoses) to filtration equipment, pumps, or accessories using a standard 1.5-inch (approximately 38mm) American connection. No more searching for incompatible parts or resorting to makeshift solutions! This complete kit, also compatible with the Intex 4560 model, allows you to create a watertight, reliable, and professional connection in seconds.

Compatibility and Applications

Target Brand: Designed specifically for Intex above-ground pools and their accessories.

Main Conversion: Adapts the 40mm Intex diameter to the standard 1.5-inch (1-1/2") diameter used by most pumps, sand filters, heaters, or robotic pool cleaners on the market.

Replaces/Compatible with: The Intex 4560 model and other similar kits.

Common Uses: Connect your Intex pool to a more powerful pump, sand filter, heater, chlorinator, or robotic cleaner.

Kit Contents (Everything is included):

✔️ 1 x 1.5" Male to Female Adapter 40 mm: Screws directly onto 1.5" equipment (pump, filter).

✔️ 1 x 1.5" Female to 40 mm Male Adapter: Screws onto 1.5" equipment and accepts the 40 mm Intex hose.

✔️ 2 x Rubber Sealing Rings: Ensure a perfect, leak-free connection for both adapters.

✔️ 2 x Stainless Steel Hose Clamps: To securely and leak-proof the 40 mm Intex flexible hoses onto the adapters.

Features and Benefits

✅ Universal Connectivity: Break down compatibility barriers and unlock the potential of your Intex pool by connecting it to a wide range of quality equipment.

✅ Minute Installation: No special tools or expertise required Plumbing required. Screw on the adapters, insert the seals, place the hose, and tighten the clamps.

✅ Total Watertight Seal: The combination of quality seals and robust clamps eliminates leaks and pressure loss.

✅ Durable Construction: Adapters made of reinforced ABS or PP plastic, resistant to UV rays and pool chemicals. Clamps made of corrosion-resistant stainless steel.

✅ Complete and Economical Kit: Everything you need in one package, at a price much lower than buying separate parts or expensive alternative solutions.

✅ Versatility: Also allows you to connect 1.5" accessories (skimmers, return jets) to your existing Intex system.

Simplified Installation Guide

Preparation: Make sure the pump is off and the system is powered down.

Adapter Installation: Screw Attach the 1.5" male to 40mm female adapter to the 1.5" inlet of your pump/filter. Screw the 1.5" female to 40mm male adapter onto the 1.5" return line of your equipment. Use Teflon tape on the threads for a watertight seal. Hose Connection: Slide a hose clamp onto the end of your 40mm Intex hose. Insert the hose onto the 40mm adapter fitting. Tighten the clamp securely with a screwdriver. Final Test: Turn the system back on and carefully check each connection for any minor leaks. Tighten slightly if necessary.

Use and Maintenance Tips

Always apply Teflon tape to the threads before screwing on the adapters.

For long-term maintenance, periodically check the tension of the hose clamps, especially at the beginning of the season.

Rinse the adapters with clean water when disassembling for the season.

Crucial Check: Confirm that your Intex hoses have an inside diameter of 40 mm (this is the most common standard).

Unleash the True Power of Your Intex Pool!

Don't let incompatible fittings limit your options. With this universal adapter kit, you'll take performance, filtration efficiency, and comfort to the next level. It's the essential accessory for any Intex pool owner looking to personalize and optimize their setup. Order today and unlock a world of possibilities!

*Note: This is a universally compatible accessory. All trademarks mentioned are the property of their respective owners.