Universal garage door remote control – 3-pack, 433.92 MHz frequency, compatible with DEA GT2/GT4/MIO/TR2/TR4/R2N

Compatible with

DEA 433.92 MHz Fixed Code

DEA 433-1, 433-2, 433-4

DEA MIO TD2, MIO TD4

DEA Dot-2, Dot-4

DEA GT2M, GT4M

Programming?

When you press a button, the remote control sends a radio signal and the LED lights up. This indicates the code type in use, as well as the HCS rolling code (red LED) (factory setting).

HT12 DIP switch (green LED)

Advanced DARTDEA rolling transmission – alternating red/green LED

Changing the transmission code

Press and hold buttons T1 and T2. Once the remote control LEDs light up (10 seconds), wait until they flash to indicate the selected code: 1 flash per second = HCS rolling code; 2 flashes per second = HT12 DIP switch; 3 flashes per second = DART. Press and hold button T1 and use button T2 to change the flashing pattern. Once the new code is selected, press and hold button T2 until the LEDs turn off (5 seconds).