Valve insert extractor/installation tool – SAE 1/4 and 5/16 brass shut-off valve (R12 R22 R410A)

[Professional Tool] For removing and installing evaporators in running systems. Quick and easy replacement of leaking evaporators. Two sizes for R410a or R22 refrigerant systems, as well as other upgraded replacement systems. Superior Craftsmanship: The valve insert removal and installation tool is made of solid brass, a durable and rust-resistant material. The metal knob is knurled for durability and long-lasting use. Time Saving: The tool easily inserts into the valve, allowing the valve insert to be checked without having to drain or shut down the refrigerant. The valve insert is easy to remove and install, saving hours of draining and refilling. Basic Steps for Removing the Valve Insert: 1. Remove the dead center from the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner fitting, and then reattach the valve to the air conditioner. 2. Ensure the tool is securely connected to the air conditioning valve, then use the tool to open the valve. Push the valve stem into the air conditioning valve and gently turn the rear knob. Locate the coil mounting bracket and loosen it. 3. After removing the valve core, pull out the valve stem, close the valve with the removal tool, loosen the screw at the end of the tool, and remove the valve core. Done!

Note: It is recommended to close the valve of the coil wrench and disconnect the internal air conditioner connection before removing the coil.

Specifications:

Item: Coil puller, R410a coil puller, R22 coil puller, air conditioner coil puller, HVAC valves, coil puller, Schrader coil puller, air conditioner maintenance for small split pressure systems.

Service connections: SAE 1/4" female thread and SAE 5/16" male thread

Color: Yellow

Material: Copper

Package includes:

1 Coil puller

1 Coil puller

10 5V1 valve inserts

Set weight: 200 g

Features:

For professionals: Do what you can when you know this product.

Suitable for: Easy connection to R22 or R410A systems with 1/4" or 5/16" connections. Yes, twice the size. Powerful: The coil insertion tool is made of pure copper, the metal handle is non-slip, and the Schrader coil cutter allows for easy and controlled coil insertion. No downtime, no refrigerant draining required. Both sizes (1/4" and 5/16") are suitable for R22/R134/R410/R32 systems. The external bypass port is equipped with a removable coil. Handle, ball joint, metal handle, handle with iron core and integrated magnet at the bottom. NOTE: To remove the valve insert, close the valve and disconnect the air conditioner from the power supply. 1 tool set for removing and installing 1/4" SAE and 5/16" coils. Contains only the contents of the above package, no other items. Note: Due to lighting conditions during photography and different screen settings, there may be slight color differences between the item pictured and the actual color. The measurement deviation is +/- 1 to 3 cm.